| Customization: | Available |
|---|---|
| Application: | Industrial, Chemical |
| Standard: | JIS, GB, DIN, ASTM |
|
Still deciding? Get samples of US$ 1.1/Piece
Request Sample
|
Suppliers with verified business licenses
Audited Supplier Audited by an independent third-party inspection agency
PRODUCTS
Specification
| Thickness | 0.14 - 0.50mm | ||
| Width | 600 - 1050mm | ||
| Length | As per customer requirement | ||
| Steel Type | MR, SPCC | ||
| Annealing | BA (Batch Annealed), CA (Continuously Annealed) | ||
| Standard | EN10202, JIS G3303, ASTM A623/ A624/ A625/ A626 | ||
| Temper | T1, T2, T2.5, T3, T3.5, T4, T5, DR7, DR8, DR8M, DR9, DR9M, DR10 | ||
| Coating for ETP | Euqally coated (1.1/1.1, 2.0/2.0/ 2.8/2.8/ 5.6/5.6, 8.4/8.4, 11.2/ 11.2) Differetially coated (2.0/1.1, 2.8/1.1, 5.6/1.1, 5.6/2.8, 8.4/2.8, 8.4/5.6, 11.2/2.8, 11.2/5.6, 11.2/8.4, 15.1/5.6) |
||
| Coating for TFS | Metal Chromium Layer: 50-150mg/m2, Chromium Oxide Layer: 5-35 mg/m2 | ||
| Delivery time | 20-45 days | ||
| Supply Capacity | 8,000MT per month | ||
| Shape | Coil, Sheet |
| Coil ID | 420mm or 508mm |
| Coil Weight | 3-8MT or 6-12MT |
| Bundle Weight | 2MT Max |
| Surface | Bright, Stone, Fine Stone, Sliver, Matt |
| Post treatment | Passivation, Dos Oil |
| Processing service | Cut to sheet, scroll cut, lacquer and print service |
| Application | A. Food Cans (Beverage Cans, Milk Cans, Fruit Cans, Tomato Cans, Edible oil etc. ) B. Industrial Cans (Paint Cans, Chemical Cans, Lube containers) C. General Line Packaging (Aerosol Can, Gift Cans, Cookies Cans, Stationery Box etc.) |
| MOQ | 25MT per size |
| Delivery Tolerance | +/-10% |
| Packing | Standard seaworthy export packing (horizontal or vertical) |
| MR | It contains few residual minor constituents and has good corrosion resistance. It is widely used for the applications of containers. |
||||
| L | It contains particularly few residual minor constituents as Cu, Ni, Cr, Mn. It is suitable for the materials of containers requiring improved corrosion resistance. |
||||
| D | It is an aluminum killed steel. It is suitable for the applications, that bear deep drawing or other workings which may produce Luder's lines patterns. |
||||
Surface finish
| Product finish | Steel base | Product | Flow-melted | Surface roughness | Remark |
| Ra (μm) | |||||
| Bright | smooth | Tinplate | Yes | ≤ 0.35 | Note 1: Double reduced product is only supplied as stone finish. Note 2: Sub-classfied based on the surface finishing of the blackplate. Note 3: The appearance is governed by: a) the surface characteristics of the steel base which principally result from controlled preparation of the work rolls used during the final stages of temper rolling; b) the mass of the coating applied; and c) whether the tin layer is flow-melted or unflow-melted. |
| Fine stone | fine stone | Tinplate | Yes | 0.25 - 0.45 | |
| Stone | stone | Tinplate | Yes | 0.35 - 0.60 | |
| Silver | shot blast | Tinplate | Yes | ≥ 0.90 | |
| Matt | shot blast | Tinplate | No | Various | |
| Fine stone | fine stone | TFS/ ECCS | - | 0.25 - 0.45 | |
| Stone | stone | TFS/ ECCS | - | 0.35 - 0.60 |
Typical Application
| Remark | Temper Grade | Typical Application | |||
| JIS G3303 | ASTM A623M ASTM A624M ASTM A625M ASTM A626M ASTM A650M |
EN10202 | |||
| Single Reduced (SR) |
T-1 | T49 | TS230 | Drawn and ironed cans, nozzles, spouts, closures, mounting cup, oil filter. | |
| T-2 | T53 | TS245 | Ring and plugs, dome tops, closures, shallow drawn parts. Drawing can, body, end for large can. |
||
| T-2.5 | T54 | TS260 | Battery shells, small can ends and bodies | ||
| T-3 | T57 | TS275 | Top and bottom of cans, can ends and bodies, large diameter closures, crown caps. | ||
| T-3.5 | T59 | TS290 | General use, pail, 18L, 4L | ||
| T-4 | T61 | TH415 | Can bodies and ends, crown caps, closures. Body and end for small can. |
||
| T-5 | T65 | TH435 | Can ends and bodies requiring intensity. Body and end for small can. |
||
| Double Reduced (DR) |
DR-7M | T71 | TH520 | DRD bodies, dome, Lug cap & 3 piece bodies | |
| DR-8 | T72 | TH550 | DRD bodies, end, Lug cap & 3 piece bodies | ||
| DR-8M | T73 | TH580 | |||
| DR-9 | T75 | TH620 | DRD bodies, Lug cap & 3 piece bodies Thinner guage body, end, DRD cans, caps. |
||
| DR-9M | T76 | - | |||
| DR-10 | - | - | DRD bodies, Lug cap & 3 piece bodies Thinner guage body, end, DRD cans, caps. |
||
| Item | Former Coating | Coating Weight | Nominal Coating Weight | Minimum average |
| Designation | Code | (g/m2) | (g/m2) | |
| Equally Coated | 10# | 1.1/ 1.1 | 1.1/ 1.1 | 0.9/ 0.9 |
| 20# | 2.2/ 2.2 | 2.2/ 2.2 | 1.8/ 1.8 | |
| 25# | 2.8/ 2.8 | 2.8/ 2.8 | 2.5/ 2.5 | |
| 50# | 5.6/ 5.6 | 5.6/ 5.6 | 5.2/ 5.2 | |
| 75# | 8.4/ 8.4 | 8.4/ 8.4 | 7.8/ 7.8 | |
| 100# | 11.2/ 11.2 | 11.2/ 11.2 | 10.1/ 10.1 | |
| Differentially Coated | 25#/ 10# | 2.8/ 1.1 | 2.8/ 1.1 | 2.5/ 0.9 |
| 50#/ 10# | 5.6/ 1.1 | 5.6/ 1.1 | 5.2/ 0.9 | |
| 50#/ 25# | 5.6/ 2.8 | 5.6/ 2.8 | 5.2/ 2.5 | |
| 75#/ 25# | 8.4/ 2.8 | 8.4/ 2.8 | 7.8/ 2.5 | |
| 75#/ 50# | 8.4/ 5.6 | 8.4/ 5.6 | 7.8/ 5.2 | |
| 100#/ 25# | 11.2/ 2.8 | 11.2/ 2.8 | 10.1/ 2.5 | |
| 100#/ 50# | 11.2/ 5.6 | 11.2/ 5.6 | 10.1/ 5.2 | |
| 100#/ 75# | 11.2/ 8.4 | 11.2/ 8.4 | 10.1/ 7.8 | |
| 125#/ 50# | 15.1/ 5.6 | 15.1/ 5.6 | 13.9/ 5.2 |
| Pickling Lag Value | Iron Solution Value | Tin Crystallite Size | Alloy-Tin Couple | |
| ≤ 10 Sec | ≤ 20µg/3in2 | ≤ 9# | ≤ 0.12µA/3in | |
| Item | Average Coating Weight (mg/m2) | |||
| Metal Chromium Layer (Metal Cr) | 50 - 150 | |||
| Chromium Oxide Layer (Cr - Oxide) | 5 - 35 | |||
| Item | Chromium weight - Min | Chromium weight - Max | ||
| (mg/m2) - Each Side | (mg/m2) - Each Side | |||
| Code 311 | 3.5 | 9.0 | ||
| Code 300 | 1.0 | 3.0 | ||
| Item | Oil Weight | Aim Oil Weight | ||
| (mg/m2) - Each Side | (mg/m2) - Each Side | |||
| Slightly | 1.0 - 3.5 | 2.5 | ||
| Normal | 3.0 - 6.0 | 4.5 | ||
| Medium | 6.0 - 9.0 | 7.5 | ||
| Light Heavy | 7.0 - 11.0 | 8.5 | ||
| Heavy | 10.0 Min | 9.5 | ||
Q 1: What's your company's role in the supply chain?
1) For supplying side, we organize production, arrange logistics and bank documents.
2) For sourcing side, we help customer to match suitable mills, control quality and risks.
Q 2: What's your company's advantages?
1) Professional in tinmill products, such as tinplate, tin free steel, lacquered and printed tinplate.
2) Responsible for risk control, quality control and cost control.
3) Experienced in steel exporting, can arrange logistics and document properly.
4) One step service for tinplate & TFS coil, sheet, lacquered and printed service.
5) Quality report with details for individual order.
6) Reasonable price and on-time delivery.
Q 3: How can we trust your company?
1) We specialized in tinmill products for years, you can ask professional questions to see we are in tinplate circle or not.
2) We always expect customer to start from trial order to test our performace first.
3) We accept independent third party inspection.
4) We welcome customer to visit our office anytime.
Q 4: What kind of payment terms do you accept?
1) TT, 30% down payment and balance payment on invoice and packing list before loading.
2) TT, 20% down payment, 30% on detailed packing list, balance payment on BL copy within three days.
3) TT + LC, 20% down payment and LC opened within five days after down payment.
4) LC at sight, or usance LC opened by first class banks.
Q 5: When will be the delivery time after order confirmed?
1) Cargo ready, usually 20-45 days depends on quantity after we received down payment or LC telex.
2) Shipment usually will be 7-10 days after cargo ready (production finished).
Q 6: What kind of shipment do you prefer?
1) We can do both container and bulk shipment.
2) Container shipment is faster but more expensive, bulk shipment is slower but cheaper.
3) We will give professional suggestions depends on customer's situation.
Please leave your enquiry in the message box at the bottom of the product page and click SEND, online salesman will contact you as soon as possible.
){kind=link}